We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

TaylorMade Junior Golf Glove Size Chart: How to Measure Your Child

Use this TaylorMade junior golf glove size chart guide to measure your child's hand correctly, read the sizing numbers, and choose a glove that fits well.

Updated November 2026

A TaylorMade junior golf glove size chart tells you which glove fits your child’s hand, but only if you measure the hand correctly first. This guide shows you how to take a clean hand measurement, match it to the size chart, and check the fit before you buy. Most sizing problems come from a glove that is a little too big or too small, so a few minutes of careful measuring saves a lot of frustration.

Why the TaylorMade Junior Glove Size Chart Matters

Junior gloves are sized by hand circumference and hand length, not by the child’s age alone. Two children of the same age can need different sizes, especially when one is tall and slim and the other is shorter and stockier. A glove that is too large lets the club slide and bunch up fabric in the palm. A glove that is too small restricts the fingers, pulls at the seams, and can make grip pressure tight and uncomfortable.

Shopping for one? See our guide: 3 Best Junior TaylorMade Golf Clubs Compared for Growing Golfers (2026).

How to Measure Your Child’s Hand

Gather a flexible tape measure or a piece of string and a ruler, then follow these steps:

  1. Have your child relax the hand with fingers together and thumb slightly out, as if holding a club lightly.
  2. Wrap the tape around the knuckles of the palm, just below the fingers and above the thumb, and note the measurement in inches.
  3. Measure hand length from the bottom crease of the palm (where the hand meets the wrist) to the tip of the middle finger.
  4. Repeat both measurements on the non-dominant hand and use the larger number if they differ.
  5. Check the chart using the measurement that falls in the middle of the size range, not the edge.

Reading the Size Chart

Size charts list a glove size next to a range of palm circumference and hand length. If your measurements fall between two sizes, choose the size that matches the palm circumference first, because that measurement affects comfort most. Manufacturers’ charts can vary slightly, so always compare against the specific chart for the glove you plan to buy.

Checking the Fit Before You Buy

Once you have a likely size, confirm the fit with your child wearing the glove. The fingertips should reach the end of the fingers without folding over, and there should be no excess material pooling at the palm. Have your child make a full grip and open the hand again. If the glove feels tight across the knuckles or the fabric pulls sharply, the size is too small. Keep in mind that a little snugness is normal for a golf glove, since the fit should hold the hand steady without restricting movement.

Measurement What to Check Sign of a Good Fit
Palm circumference Tape around the knuckles Matches the size range, not the edge
Hand length Palm crease to middle fingertip Fingertips reach the glove without folding
Grip test Full closed grip and release Smooth movement, no pulling at seams

Common Mistakes to Avoid

  • Measuring age instead of hand size. Age is only a rough guide and often leads to the wrong size.
  • Buying a glove a size up to allow for growth. Oversized gloves slip during the swing and hurt grip control.
  • Measuring while the hand is clenched or stretched. Keep the hand relaxed for an accurate reading.
  • Ignoring the difference between left and right hands. Measure both and confirm which hand the glove is made for.
  • Skipping the fit check. A glove that looks right on the chart can still feel wrong on the hand.

A fabric tape measure makes the sizing steps easier to repeat accurately as your child grows. View on Amazon

Checking the glove on the actual hand is the most reliable step, so a few spare gloves in neighboring sizes can help you compare fit side by side. View on Amazon

For more sizing help across brands, see Junior Golf Glove Size Guide: How to Measure Your Child's Hand (2026) and Junior Golf Glove Size Chart: How to Measure Your Child's Hand (2026). If you are comparing a different brand, FootJoy Junior Golf Glove Size Chart: How to Measure Your Child's Hand and Puma Junior Golf Glove Size Chart: How to Measure Your Child's Hand cover similar steps.

FAQ

How often should I re-measure my child’s glove size?

Measure every season or whenever your child seems to be outgrowing their gloves, since hands can grow quickly during the junior years. A quick check at the start of each season catches most sizing changes early.

Can I use a TaylorMade junior glove on a child with a different glove size on each hand?

Many junior golfers have slight differences between hands. Buy for the hand that gives the larger measurement so the glove fits comfortably on both, or buy one glove per hand in the sizes that match each hand.

What if my child’s measurement falls between two sizes?

Choose the size that matches the palm circumference, since that affects comfort most. If the fit check feels too loose or too tight, try the other size before deciding.

Conclusion

Measuring palm circumference and hand length gives you a reliable starting point for any TaylorMade junior golf glove size chart. Compare the measurements carefully, then confirm the fit with a full grip before you commit. A well-fitted glove helps your child hold the club steadily and grows with their game.

Claire Whitaker

About Claire Whitaker

Claire Whitaker is part of our editorial team and reviews and edits our junior golf gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Claire Whitaker
Claire Whitaker

Claire Whitaker writes reviews and buying guides for Junior Golf Results.